Çiltuğ Isi Sanayi ve Tic, which is currently a major supporter and investor of renewable energy. A.Ş, 7.000 m designed for the activities in the sector, especially for the production of wind towers2; closed area, 25.000 m2; it started with the construction of the Wind Tower and Accessories Factory built on an open area.
- Steel wind tower production with a capacity of 80 towers per year (up to 105 tons per piece)
- Rotor houses,
- Main carcasses for stator structures and offshore rigs
- Generator Brake discs & Stator plates,
- Turbine transportation frames,
- Anchor cages c/w flanges and foundation rings,
- Turbine Blade hubs,
- Mechanical internal components and platforms (kit sets)
- Installation of the electrical and mechanical internal accessories of the wind generator in the installation area ready for operation.
- Nordex Energy GmbH
Sincik RES Projesi – 11 Adet Kule, Tip: N100, R80 MT5.1 EC 2a
- Lagerwey
System BV – 2 Adet Kule ve İç Aksamı, Tip: L100; 96.7 M
- Baykal Enerji
4 Adet Kule ve İç Aksamı, Tip: 68M HH, TC3
- Amperax / Meriç Enerji
2 Adet Kule ve İç Aksamı, Tip: 92M / 3MW
- Areva Wind GmbH
TG01 Tip Nakliye Karkası, Ağırlık: 196 ton
Quality Control
The manufacturing and assemblies in these factories are carried out by our experienced technical staff in accordance with international quality and standards and Quality Management Systems ISO 9001:2015. In addition to this standard, our technical team is equipped with EN ISO 3834-2 Fusion Welding of Metallic Materials Management Quality Requirements System, ASME U&S Onayı’na, ISO 14001:2004 ve OHSAS 18001:2007 He has Occupational Health Safety and Environmental Management System certificates.
Automatic Surface Cleaning, Sand Blasting and Painting Booths
Sand Blasting Cabinet
Size: 8 x 30.5 x 6.5m
Equipment: Automatic External Surface Blasting Equipment with Turbine, Capacity: 80 m per hour2
Manual Internal Surface Blasting Equipment, 4 sets, Capacity: 50 m per hour2
Painting Booth
Ebat: 10 x 30.5 x 6.5 m
Equipment: Heating Device, Circulation Device, Lighting and PLC System
PLC Controlled Painting and Curing Cabinets
Cabin Size (G x U x Y) 10 x 30.5 x 6.5 m
Equipment: Heating Device, Circulation Device, Lighting and PLC System
Mekanik ve Elektriksel İç Aksamının Kurulumu
The installation of all mechanical and electrical internal components, including platforms, wiring, service elevators, stairs, is carried out by our experienced installation team in our factory and at the construction sites where the project takes place.
Storage Area
80 tower sections were stored in the form of a single floor stack consisting of shells, and 160 tower sections were stored in the form of a double-storey stack.
Load Release and Fixing Flanges
Delivery and Assembly
